Lincoln® Quicklub QLS 301 For Grease Back Valve Remote Control SSV6 Valve Type
The QLS 301/311 for Remote Control allows customers to be in control of the lubrication process. The 24 VDC models monitor system cycling with a proximity switch. An external timer or PLC controls the interval between lube cycles. The 120 VAC models have no cycle monitoring and are on/off controlled by the users external timer or PLC. The minimum pause time requirements should be followed when setting up the external controller.
Installation kit comes with everything that's needed for quick set-up. And both units come in versions for 6 12 or 18 lube points. Environmentally-friendly, with a built in safety valve and overfill protection.
Compact pre-assembled pump and metering valve work with customer's PLCs, no need for separate controller.
Handle up to NLGI #2 grease for QLS 301
Works between -10°F and 158°F allowing operation in many environments
-24 VDC/1.0 A
-10°F to 158°F/-25° to 70°C
Number of Outlets
Minimum Pause Time
4 min. DC models
Maximum Operating Time
25 min. DC models
Maximum Operating Pressure
Grease: 3000 psi/205 bar Oil: 1160 psi/80 bar
Output per Outlet & Cycle
approx. 0.012"/approx. 0.2 cm.
up to NLGI 2 grease
You can return unused or defective products up to 30 days from the date of order. Some product returns may be subject to restocking fees. Proof of Purchase will be required if we cannot verify your order information. Unless the product is defective or damaged in transit, the customer is responsible for return shipment costs.
Defective or Damaged Products
All shipments received must be immediately inspected for damage. If your order shipped on a freight carrier, any damage needs to be noted on the Freight Receipt before signing for the delivery. An exchange or refund will be provided at no additional cost. If damage is due to misuse or regular wear of the product, the return will be denied.
If you need to cancel your order for any reason, please contact us immediately. If the order is canceled prior to shipping, you will be refunded in full. Certain products that are manufactured to order cannot be canceled after the manufacturing process has started.