Lincoln Pressure Primer
***This item ships free***
Lincoln’s mounting accessories include an elevator (Model 1709) to facilitate drum change-over by lifting the pump from an empty drum and lowering it into a new drum with minimum effort. Primers and pressure primers are available for positive priming of viscous materials which are forced into the pump inlet by the downward force of the follower. Models are available for most applications from 5-gallon pails to 55-gallon drums. Models include followers with O-ring seals single O-rings for 5-gallon pail units and double O-rings for 55-gallon drum units) which seal the container of material from outside contamination and drying while wiping the container’s sides clean.
Pressure primers include a four-way valve which permits the air supply to be coupled to the unit at all times. Use of an air regulator and gauge is recommended. In order to prevent damage to pumps caused by operating after a drum is empty,a low-level air cut-off assembly is recommended.
Operating Air Pressure psi / bar: 40-150 / 3-10
For Drum Size Gal.: 55
Lowered in. / cm: 66⅛ / 167.6
Raised in. / cm: 103 / 261.6
Base Dim.in. / mm: 24 x 36 / 600 x 1000
You can return unused or defective products up to 30 days from the date of order. Some product returns may be subject to restocking fees. Proof of Purchase will be required if we cannot verify your order information. Unless the product is defective or damaged in transit, the customer is responsible for return shipment costs.
Defective or Damaged Products
All shipments received must be immediately inspected for damage. If your order shipped on a freight carrier, any damage needs to be noted on the Freight Receipt before signing for the delivery. An exchange or refund will be provided at no additional cost. If damage is due to misuse or regular wear of the product, the return will be denied.
If you need to cancel your order for any reason, please contact us immediately. If the order is canceled prior to shipping, you will be refunded in full. Certain products that are manufactured to order cannot be canceled after the manufacturing process has started.