Type I Safety Can, 2.5 Gal. Red with F-15 Funnel
Couldn't load pickup availability
Eagle® Type I Safety Can, 2.5 Gal.
Eagle cans are constructed of 24-gauge hot dipped galvanized steel, are the only deep drawn seamless can made, have a double interlock no-weld bottom seam, a baked-on powder coat finish with a trilingual label, have a spring closing lid with neoprene gasket that vents at 5 psi internal pressure, have a non-sparking flame arrestor and pour spout, at 100 percent made in the USA.
Eagle Manufacturing Company 2.5 gallon Type I red safety can (UI25FS) meets OSHA and NFPA Code 30 requirements and is UL and ULC listed and FM approved for safe handling and storage of gasoline and other flammable liquids (Accepted Under CARB). Also meeting the New York City Fire Code Title 29 FC 2184.108.40.206.1 Maximum 2.5 gallon container regulations.
|WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
|FM, UL, ULC
|CARB, NFPA, OSHA
|11.25" Outer Dia.
You can return unused or defective products up to 30 days from the date of order. Some product returns may be subject to restocking fees. Proof of Purchase will be required if we cannot verify your order information. Unless the product is defective or damaged in transit, the customer is responsible for return shipment costs.
Defective or Damaged Products
All shipments received must be immediately inspected for damage. If your order shipped on a freight carrier, any damage needs to be noted on the Freight Receipt before signing for the delivery. An exchange or refund will be provided at no additional cost. If damage is due to misuse or regular wear of the product, the return will be denied.
If you need to cancel your order for any reason, please contact us immediately. If the order is canceled prior to shipping, you will be refunded in full. Certain products that are manufactured to order cannot be canceled after the manufacturing process has started.