Chemical Compatibility
Type II AccuFlow DOT Steel Safety Can, 2.5 gal, 1" Hose, Flame Arrest
Couldn't load pickup availability
Over 50 years in the industry, demonstrating reliability.
Serving customers across all 50 states.
Products designed for heavy-duty use.
30 Days Return Policy*
Trusted By
Product Overview
Use this trusted and reliable 2.5 gal (9 L) Justrite red DOT Type II Accuflow Steel Safety Can with Roll Bars (model 7325130) for over-the-road transport of flammable liquids, like gasoline, and as a safety can for onsite fuel dispensing. Transporting gasoline and other flammable liquids is required across many industries including, but not limited to, construction, landscaping, mining, golf course maintenance, and tow truck operators.
Compliance with the Department of Transportation (DOT) regulations for over-the-road transport of flammables is simpler with Justrite's DOT-compliant Type II safety can - ideal for remote gas-fueled equipment.
Key listed details include capacity 2.5 gallon(s), dimensions 12.7" H x 11.75" Outer Dia.
Key Features
- Meets DOT regulations for over-the-road transport of gasoline
- Heavy-duty roll bars protect the spout from damage during falls
- Can dimensions of 12.7 in H x 11.75 in OD (305 mm H x 298 mm OD)
- Complies with DOT, HM-181, UN 1A1/Y1.2/100, CARB, OSHA, and NFPA Code 30; FM approved
- Capacity: 2.5 gallon(s)
- Compliance: CARB, D.O.T, HM-180, NFPA, OSHA
Ideal For
Choose this product if you need:
- Replacing, adapting, or adding components for compatible Justrite cans or drums
- Users matching the accessory to the listed can, drum, hose, or funnel requirements
- Applications within the listed capacity: 2.5 gallon(s)
- Buyers looking for Steel construction
- Facilities checking listed approvals or compliance: CARB, D.O.T, HM-180, NFPA, OSHA
Not Ideal For
Not ideal if the accessory size, connection, material, or compatible product does not match your existing equipment.
Product Details
| Model No. | 7325130 |
| Capacity | 2.5 gallon(s) |
| Compliance | CARB, D.O.T, HM-180, NFPA, OSHA |
| Approvals | FM |
| Material | Steel |
| Exterior Dimensions | 12.7" H x 11.75" Outer Dia. |
| Fill/Pour Hole | 1.68" |
| Color | Red |
Frequently Asked Questions
What is this accessory used for?
This accessory is used for matching a compatible Justrite can, drum, funnel, hose, or lid setup. Always compare your application with the product details shown above.
What should I check before ordering?
Check the listed capacity (2.5 gallon(s)), dimensions (12.7" H x 11.75" Outer Dia.), material (Steel), approvals or compliance (CARB, D.O.T, HM-180, NFPA, OSHA) to make sure it matches your facility, material, and use requirements.
Does this product list approvals or compliance information?
Yes. The product details list CARB, D.O.T, HM-180, NFPA, OSHA. Confirm that those listings meet your internal safety and compliance requirements before purchasing.
Important Information
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You can return unused or defective products up to 30 days from the date of order. Some product returns may be subject to restocking fees. Proof of Purchase will be required if we cannot verify your order information. Unless the product is defective or damaged in transit, the customer is responsible for return shipment costs.
Defective or Damaged Products
All shipments received must be immediately inspected for damage. If your order shipped on a freight carrier, any damage needs to be noted on the Freight Receipt before signing for the delivery. An exchange or refund will be provided at no additional cost. If damage is due to misuse or regular wear of the product, the return will be denied.
Order Cancellation
If you need to cancel your order for any reason, please contact us immediately. If the order is canceled prior to shipping, you will be refunded in full. Certain products that are manufactured to order cannot be canceled after the manufacturing process has started.