Lincoln Electric Grease Pump W/ RemoteLinc Technology - P203 Series - No Lid - 24V
These pumps are electrically operated and are used in progressive-type automated lubrication systems. The proven and reliable P203 pump has been designed to develop high operating pressures allowing it to supply NLGI #2 grease in most ambient temperatures.
Easily interfaces with OEM and aftermarket telematics systems.
Allows users to: Remotely monitor and detect low lubricant levels and system faults. Reduce cost by receiving immediate, real-time alerts when lubricant is low or the system is in fault.
- Lubricant Outlet: 1/8" NPT (F)
- Max. System Operating Pressure: 5000 psi
- Electrical Requirements: 24 VDC
- Reservoir Capacity: 4 liter
||12 VDC @3.5 amps, 24 VDC @ 2 amp, 94-265 VAC (50 to 60 Hz)
|Interval Between Lube Cycles
||Min. 4 minutes/Max. 15 hours.
||0.171 cu.in./min./2.8 cc/min.
||1/8" NPT (f)
||2-, 4-, 8- or 15-liter**
|Maximum Recommended Operating Pressure
||5000 psi/350 bar
||Greases NLGI grade 2 (depending on operating temperature and type of lubricant)
||-13°F to +158°F
|Pressure Relief Valve
||4000 psi/±250 psi
You can return unused or defective products up to 30 days from the date of order. Some product returns may be subject to restocking fees. Proof of Purchase will be required if we cannot verify your order information. Unless the product is defective or damaged in transit, the customer is responsible for return shipment costs.
Defective or Damaged Products
All shipments received must be immediately inspected for damage. If your order shipped on a freight carrier, any damage needs to be noted on the Freight Receipt before signing for the delivery. An exchange or refund will be provided at no additional cost. If damage is due to misuse or regular wear of the product, the return will be denied.
If you need to cancel your order for any reason, please contact us immediately. If the order is canceled prior to shipping, you will be refunded in full. Certain products that are manufactured to order cannot be canceled after the manufacturing process has started.